Product ID : CTG200 ~ CTG250

Dust Collection - Emery Wheel Grinding Machine with Automatic Dust Collection ( CTG200 ~ CTG250)

Brief introduction of automatic grinder:
General grinder must install convulsions additional, collect dust system in addition all, so cumbersome taking space, fault rate high, noise heavy, extravagant energy, this machine is made up as one, have the following characteristic:

• It is good to collect the dust result, is up to 95% ~ 100%
  
• There is no noise, the grinder is corrected by the balance, steady, quiet, handy.
  
• Not the trouble, except changing the emery wheel slice, several does not have any trouble point.
  
• Safe, if the emery wheel breaks will not wound operators to collect the dust one outwards to can totally enter the standing upright type, breastplate and protecting the mirror and can also be totally blocked the less particle.
  
• The job light is getting on while starting, grinds the things and can warn staff members, avoiding touching the emery wheel while operating by mistake injures in illumination.
  
• Opening type protecting cover, it is very convenient to be simple to change the emery wheel.
  
• It is more accurate and accurate to grind one after balancing and correcting.
  

Model Type	Emery Wheel Size	Voltage	Pole	Frequency (HZ)	Speed (R.P.M.)	Measurement W x L x H (m/m)
CTG-200-1/2HP	8	3Phase	2P	60 / 50	3,450 / 2,880	610 x 530 x 1,000
CTG-250-1HP	10	3Phase	2P	60 / 50	3,450 / 2,880	730 x 580 x 1,100